Search Results for: homing

你可能需要先了解什么是Homing，然后做一个有关于GRBL Homing的测试 如果您的设备在测试GRBL homing的时候撞到末端不会停下并发出很大噪音 或者 软件显示homing fail，请按照下面的步骤排除故障： 先测试您的步进电机，确保您的步进电机按照正确的方向前进了正确的距离 在确认您的电机没有问题，请检查您的限位开关 什么是限位开关？ 限位开关是一个机械按钮，在不同的设备上会被安装在不同位置，它的作用是当电机运行到末端的时候此限位开关会被触发，如果您的电机运行到末端不会停下并发出噪音，请检查是否有异物阻止了限位开关被触发，另外，你可能还需要检查您的限位开关是否正常，尝试用手指按下限位开关，在限位开关被按下时，限位开关会发出类似‘Click’的声音，移开手指限位开关会正常弹起。 如果您不知道您设备的限位开关在什么位置，下面的图片或许可以给你帮助

Before testing, you need to know abot GRBL homing Step 1: Connect device with LaserGRBL Setp 2: Press homing button to start homing. FAQ: Homing button is not showing For NEJE Master 1/2 series device, auto homing is not supported, please homing manually. Homing fail Make sure you have reset grbl setting by flash grbl

This article applies only to NEJE 2S Series rename tips The homing function is GRBL reset, which returns the device to its origin position (typically (0,0) position) But for NEJE 2S series devices, homing is a little different because the limit switch is not installed in the origin position Here is an examples of NEJE

Info NEJE 3 and NEJE 3 Plus share the control board, The control board of NEJE Max 4 can also be used as NEJE 3 Max(the control board of NEJE 3 Max can’t be used as NEJE Max 4), So here is a way to change the motherboard model. Step Note Bluetooth name will change