Software and Hardware

There are two types of belt problems, too loose or too tight Too tight Too loose How to judge my belt is too tight ? Disconnect the wires from the motor first (this is important) and try moving the axis back and forth by hand, it shouldn’t be a lot of effort, for the X […]

This page is moved to a new place: https://wiki.neje99.com/en/manual/wiring

Disassemble your control board from your device. The version mark usually marked on the front of the board. The following are examples of NEJE 2S and NEJE 2S Max. the version of NEJ 2S control board in the figure is v1.1, The version of NEJE 2S Max control board is v2.0

When connecting lightburn or lasergrbl, you need to select the correct port to connect to the device. This is not a problem for most customers, because there is often only one port in ports list, but there are exceptions. Here will teach you how to identify your device port number. this PC->Properties->Device Manager->COM&LPT For NEJE

What is feed rate? meaning of mm/sec and mm/min, please see here, You can simply think of it as cutting speed. What is burning time? The burning time is an original creation of neje. The image carving of neje is not controlled by G code, but by accurately controlling the time when the laser stops

For NEJE 3/4/5 Series Device Click here download driver for NEJE 3/4/5 series device Please install driver when youe NEJE device USB is connected to your PC. For NEJE 1/2/2S Series Device and NEJE KZ/BL Click here download driver for NEJE 1/2/2S Series and KZ/BL Ask: Driver install failure Answer: Click UNINSTALL first then click

Install App: For Android: Download control software from download page. For iOS and macOS(10.15 required): Search and download NEJE Wireless from app store. How to connect bluetooth with NEJE device: FAQ: Ask: Can’t connect to my device at Setting of my phone. Answer: Don’t need go to Setting page of your phone, Just run NEJE

If your software show like this: Solution: Install driver